***ALL TNV NIGHT VISION SYSTEMS ARE SEMI-CUSTOM UNITS BUILT TO ORDER–***ALL TNV NIGHT VISION SYSTEMS ARE SEMI-CUSTOM UNITS BUILT TO ORDER–CURRENT LEAD TIME ON TNV/PVS-14 ESA TF WP IS APPROXIMATELY 18-22 WEEKS***
The PVS-14 is the standard-issue night vision optic serving US forces on the front lines of the Global War on Terror. Its phenomenal versatility makes it the premier choice for Law Enforcement Professionals as well. PVS-14’s can be mounted on helmets for hands-free use, behind weapon optics, or simply as a handheld device. As a monocular, the PVS-14 provides Gen3 night vision aid to one of the operator’s eyes, leaving the other to retain its natural night-adapted vision. This is important when changing light conditions in the field cause the user to go back and forth between aided and un-aided vision. Military and Law Enforcement operators need the ability to instantly switch between night vision and white light as the situation develops.
The TNV/PVS-14 is a U.S.-made Generation 3 night vision monocular based on the standard issue AN/PVS-14. Our professionally-trained and experienced technicians assemble the TNV/PVS-14 according to U.S. Military guide lines, using factory-new parts and hand-selected image intensifier tubes. We offer all TNV/PVS-14’s in several kit configurations to make sure end users get everything they want, while not paying for accessories they do not need.
This version of the TNV/PVS-14 is built with a new-production Elbit Systems of America-Night Vision (Formerly Harris / ITT / Exelis – now ESA-NV) Gen3 F9415YH image intensifier tube. These tubes are hand-selected to meet current U.S. Military OMNI VIII contract specs and provide some of the cleanest images available. Harris is one of two factory manufacturers of image intensifier tubes in the United States and the largest producer of night vision in the world. They provide build the standard issue AN/PVS-14 for the U.S. Army, Navy, and Air Force. ESA-NV F9415YH tubes feature a thinner thin that allows them to capture and process more light, providing the user with a brighter image. But, the thin-film means they do not hold up as well to weapon recoil. These tubes are weapons rated for 5.56x45mm NATO. Please note that while the ESA-NV F9415YH tube is an OMNI VIII Gen3 equivalent tube, the entire TNV/PVS-14 system cannot be classified as MIL-SPEC because it is assembled by TNVC at our facility. Only fully factory-assembled L3Harris and Elbit Systems of America AN/PVS-14s, built for a U.S. Military contract can be called MIL-SPEC. However, the TNV/PVS-14 provides the same performance.
The TNV/PVS-14 is available in several colors/finishes. Customers can choose standard black, Flat Dark Earth (FDE), or officially-licensed Crye MulticamTM. All of the housings start off as black. But, pure black sticks out like a sore thumb in the real world. This is why most Warfighters paint their black gear if given the opportunity. So, we have decided to offer the option of having a professional factory finish camouflage available on the TNV/PVS-14 and J-Arm. FDE is the standard base color used to camouflage into most environments. Our FDE coating is an eight-step process. Several coats of base and color are applied to provide a rich, matte surface. The final coats of matte clear are the same used in the automotive and marine industries. They provide a durable protective finish that will hold up to almost anything you can throw at it.
MulticamTM is a patented camouflage pattern developed by Crye Precision and is currently in use by U.S. SOF personnel across the globe and U.S. Warfighters in Afghanistan. It was adopted early on by U.S. Military and Law Enforcement Special Operations units and is the most popular pattern on the battlefield. Like our FDE coating, our MulticamTM TNV/PVS-14’s, are professionally coated by a company that specializes in durable finishes. This officially licensed pattern is applied as a hydro-dip/water-transfer printing process. This is the same process used to produce durable pattern finishes on items such as Ops Core FAST Helmets. So, it is incredibly durable. Several coats of base and color are applied before the hydro-dip film. The unit is finished off with the same automotive/marine matte clear coat as the FDE units. While hydro-dipping will create some minor imperfections, they do not affect the performance or durability of the finish.
Because TNV/PVS-14’s are built to such a high standard, they require very little maintenance. At TNVC, we use the U.S. Army and U.S. Marine corps standards for both Maintenance and Repair of our PVS-14 monocular systems. These Preventative Maintenance Checks and Services are outlined in: ARMY TM 11-5855-306-10, MARINE CORPS 10271A-10/ 1A. These U.S. Military maintenance standards state that upkeep maintenance is not required unless something is visibly broken or the unit is malfunctioning. A copy of these standards is included with each system. But, if you feel the need to send your TNV/PVS-14 in for us to check over, you can do so once a year at no charge. However, un-needed disassembly can lead to premature parts wear and fatigue of your system. Preventative maintenance is not recommended.
TNVC & Night Goggles, Inc. Limited Lifetime Warranty
TNVC, Inc. and Night Goggles, Inc. warrants this product for the lifetime of the product and guarantees this product to be free from manufacturing defects in material and workmanship under normal use, and transferable by the owner assuming that the product otherwise still falls within the scope of this warranty. In the event that a defect covered by this warranty occurs TNVC, Inc. or Night Goggles, Inc., at its discretion, will either repair or replace the product. Such action on the part of TNVC, Inc. or Night Goggles, Inc. shall be the full extent of the company’s liability, and the customer’s sole and exclusive remedy. This warranty applies to all TNV and NGI-branded Night Vision Device housing systems, and furthermore warrants that all Image Intensifier Tubes will be free from manufacturing defects in material and workmanship under normal use for a period of 10 years after the original date of purchase. This warranty does not cover:
- Products that were used in other than normal and customary manner.
- Products that were misused.
- Products that were altered, modified, or repaired by the customer or a party other than TNVC, Inc.
- Products that were discontinued by the manufacturer and either parts or replacement units are not available due to reasons beyond the control of TNVC, Inc.
- Damage, defects, or failures resulting from use that would be construed by any reasonable person as normal and expected “wear and tear.”
TNVC, Inc. shall not be responsible for any defects or damage that in the company’s opinion, resulted from the mishandling, abuse, misuse, improper storage, or improper operation, including use in conjunction with equipment which is electrically or mechanically incompatible with or of inferior quality to the product, as well as failure to maintain the environmental conditions specified by the manufacturer. This includes using rechargeable batteries, storing the product with batteries installed, or battery compartment corrosion due to faulty battery. Warranty claims falling outside of the scope of these written warranty terms may incur repair, labor, and shipping fees charged to the customer.
Customer is hereby notified that operation of the equipment during daylight or under excessive light conditions may permanently damage the image intensifier tube. While all TNV and NGI systems are auto-gated, they are not able to withstand exposure to constant light including, but not limited to, light sources, weapon sights, laser radiation. Auto-gated Image Intensifier Tubes are designed to stand up to nighttime battlefield light conditions, but prolonged exposure to any light source will still cause damage.
No other warranties except for this one apply to this product, including, but not limited to written, oral, statutory, expressed or implied, including any implied warranty or merchantability or fitness for particular purpose, shall apply to this product.
Export of Night Vision Equipment or related accessories (such as manuals) is strictly regulated by the US Department of State in accordance with the guidelines of the International Traffic in Arms Regulations (ITAR). It is a major crime to ship or carry US manufactured night vision devices outside the borders of the United States, punishable by fines and prison sentences. Ignorance of these regulations will not hold up in court. By purchasing night vision equipment from TNVC, you attest that you will not attempt to export or carry this night vision equipment outside the borders of the United States. Also, it illegal to allow a non-US Citizen to look through US Gen3 Night Vision Devices, even on US soil. Again, this is a crime punishable by fines and prison sentences.
||4.5″(L) x 2.0″(W) x 2.25″(H)
||Corrosion Resistant- Matte Black, FDE, or Crye MulticamTM
||One (1) Standard AA Battery
||Approx. 50 Hours at Room Temp.
||60′ for 2 Hours
||Lifetime System Warranty & 10 Year Warranty on image intensifier
||U.S. Gen3 Elbit Systems F9415YH
||64-72 lp/mm Typical
||40º + 2º
||+4 to -6
||10″ to Infinity
||TNV/PVS-14, PVS-14 Adapter (J-Arm)- Color-Matched to Goggle, Rubber Eye Cup, Daylight Filter, Sacrificial Window, Demist Shield, Neck Cord, Soft Carry Case, Two (2x) AA Batteries, Lens Cleaning Tissue, Military Maintenance Standards, Warranty Registration
||Entire Basic Kit + TNVC TM-14 Weapon Mount, Aimpoint Twist Mount Base